Insertion Type Electromagnetic Flowmeter Sewage Tap Water Measurement
Product Details
| Output Signal: | 4-20 MA | Velocity: | 0.3-10m/s |
|---|---|---|---|
| Table Body Material: | 316L SS | Power Supply: | 24VDC |
| Working Pressure: | ≤2.5Mpa | Measurementrange: | 0.1 To 10 M/s |
| Powersupply: | 24 VDC Or 220 VAC | Output: | RS485 |
| Frequency Output: | 1-5000Hz | Power Consumption: | <20W |
| Highlight |
Insertion Electromagnetic Flowmeter,Insertion Electromagnetic Flow Meter,Insertion Type Electromagnetic Flow Meter |
||
Product Description
Insertion Electromagnetic Flowmeter For Sewage And Tap Water Measurement
An insertion electromagnetic flowmeter is a type of instrument that measures the flow of conductive liquids by inserting a sensor through an opening in the pipe. It is particularly suitable for large-diameter pipes, situations where installation during flow interruption is difficult, and industrial environments containing a small amount of solid particles or high-viscosity media.
- Non-interruption installation: The "pressure tapping" technology is adopted, allowing installation without production halt or process interruption. For large pipelines, this avoids significant production loss.
- Strong adaptability to pipe diameters: One model of the insert-type flowmeter can cover a very wide range of pipe diameters (e.g., DN80 to DN3000), offering excellent cost performance. The larger the pipe diameter, the more obvious the cost advantage over pipe-type flowmeters.
- Minimal pressure loss: The sensor rod offers minimal obstruction to the fluid flow, generating almost no additional pressure loss and achieving good energy-saving effects.
- Convenient maintenance: The sensor rod can be pulled out from the pipeline for inspection or replacement by closing the ball valve without system shutdown.
| Parameter Category | Standard Model | High Precision Model | Anti-wear and Anti-corrosion Model |
|---|---|---|---|
| Diameter Adaptation Range | DN100 - DN3000 | DN150 - DN2000 | DN100 - DN1500 |
| Accuracy Grade | ±1.0% - ±2.5%FS | ±0.5% - ±1.0%FS | ±1.0%FS |
| Medium Conductivity | ≥5μS/cm | ≥5μS/cm | ≥10μS/cm |
| Flow Velocity Range | 0.1 - 10m/s | 0.05 - 10m/s | 0.1 - 8m/s |
| Temperature Range | -40 - 180℃ | -40 - 200℃ | -20 - 150℃ |
| Working Pressure | ≤10MPa | ≤16MPa | ≤10MPa |
| Protection Grade | IP67/IP68 | IP68 | IP68 |
| Characteristics | Insertable Electromagnetic Flowmeter | Pipeline Electromagnetic Flowmeter |
|---|---|---|
| Accuracy | Low (±1.0% ~ ±2.5%) | High (±0.3% ~ ±0.5%) |
| Cost | Low (especially for large diameters) | High (cost increases sharply with diameter) |
| Installation | Convenient, can be installed without interrupting flow | Complex, requires pipeline disconnection |
| Diameter | Large (DN80 and above) | Full coverage of large, medium and small diameters |
| Maintenance | Convenient, can be maintained without interrupting flow | Requires shutdown for maintenance |
| Applicable pipe materials | Only conductive pipes | Any pipe (grounding required) |
| Application positioning | Process monitoring, energy management, auxiliary measurement for large flow trade handover | Accurate measurement, trade settlement, formula control |
The insertable electromagnetic flowmeter is an economical and practical flow measurement solution. It sacrifices some accuracy in exchange for excellent installation convenience and cost-effectiveness on large-diameter pipes.
When making a choice, please keep in mind its positioning: it is a "powerful tool" for flow monitoring and management of large-diameter pipes, rather than a "ruler" for high-precision trade settlement. If your application scenario does not have high requirements for accuracy, but involves large-diameter pipes, difficult installation and a limited budget, then the insertable electromagnetic flowmeter is an extremely ideal option.
Product Highlights
Insertion Electromagnetic Flowmeter For Sewage And Tap Water Measurement An insertion electromagnetic flowmeter is a type of instrument that measures the flow of conductive liquids by inserting a sensor through an opening in the pipe. It is particularly suitable for large-diameter pipes, situations ...
Petroleum Radar Level Gauge 26GHz High Temperature Industrial
Petroleum Radar Level Gauge for High-Temperature Industrial Tank Measurement Oil storage is a high-stakes business: every millimeter of level represents valuable product, and every measurement error becomes an inventory loss or a safety risk. The QWRD80G603 petroleum radar level gauge brings 26GHz ...
Portable FMCW Radar Level Gauge IP67 Liquid Measurement Sensor
Portable FMCW Radar Level Gauge for Quick, Accurate Liquid Measurement Anywhere Sometimes you do not need a permanently installed instrument; you need a reliable level reading here, now, at any tank in the plant or in the field. The QWRD80G611 portable FMCW radar level gauge brings laboratory-grade ...
Intelligent Digital Pressure Transmitter Multi-Unit LCD Alarm Relay
Digital pressure transmitter with integrated backlit LCD, local pushbutton configuration, and alarm relay output. Multi-unit display (MPa, kPa, bar, psi, kgf/cm²), IP67 protection, and HART 7 protocol for smart plant integration.
Universal Gauge Pressure Transmitter 4-20mA Oil Water Gas Measurement
Universal Gauge Pressure Transmitter for Oil, Water and Gas 1. Why You Need a Gauge Pressure Transmitter Most industrial pressure measurements — pump discharge, line pressure, tank head, filter differential — are expressed relative to the surrounding atmosphere. A gauge pressure transmitter reads ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
