Stainless Steel Pneumatic Ball Valve 220V 24V Three Way Explosion Proof

Pneumatic ball valve is one of the most common actuators in industrial automation control systems. It uses compressed air as the power source to achieve rapid opening and closing or proportional regulation of the valve.

• Quick opening and closing: Only a 90-degree rotation is needed to complete the opening and closing action, which is very fast.
• Low fluid resistance: The flow resistance of full-bore ball valves is almost zero.
• Good sealing performance: When PTFE and other soft sealing materials are used, zero leakage can be achieved.
• Simple structure and easy maintenance: The sealing ring is generally movable and easy to disassemble and replace.
• High reliability and long service life: Especially suitable for frequent opening and closing occasions.
• Safe and explosion-proof: Powered by compressed air, it is intrinsically safe and suitable for flammable and explosive environments.

To achieve automated control, pneumatic ball valves need to be equipped with the following accessories:

• Solenoid valve: A "switch" that controls the on-off and direction of compressed air, receiving electrical signals from PLC or DCS, and is the core of automated control.
• Limit switch: Used to remotely feedback the open or closed position signal of the valve.
• Air source treatment trio: Filters (removes impurities), reduces pressure (stabilizes pressure), and lubricates (extends the service life of the actuator) the compressed air.
• Manual operation mechanism: Allows manual operation in case of power failure or air source failure.
• Positioner: If the ball valve is to be used for proportional regulation (rather than just on-off), a positioner needs to be installed to precisely control the rotation angle of the ball.

• Switch Control: In almost all industrial fields, such as water treatment, petrochemicals, power, papermaking, etc., it is used for remote on-off control of pipeline media.
• Safety Interlock: Linked with alarm systems for fire, leakage, etc., to urgently cut off material supply (single-acting pneumatic heads are often used).
• Two-position Regulation: In some less demanding situations, for simple "high flow/low flow" switching.

The pneumatic ball valve is the "quick switch hand" on industrial automation pipelines. With its simple structure, rapid action, reliable sealing and inherent safety, it has become the absolute mainstay in the field of automatic control valves. Although it is not good at precise flow regulation, it is the undisputed first choice in situations that require quick shut-off, frequent operation or safety interlocks. A complete pneumatic ball valve system (valve + actuator + solenoid valve + limit switch) is the perfect embodiment of "one-button start-stop" or "remote automatic control".