Guide Rail Temperature Transmitter Expert Integration Solutions
Product Details
| Object Distance Ratio: | 20 : 1 | Thread Connection Type: | 1/2NPT Or 1/4NPT |
|---|---|---|---|
| Output Signal: | 4-20 MA, HART, FOUNDATION Fieldbus | Output: | 0...23 MA / 16 MA |
| Application: | Widely | The Maximum Current: | 50mA |
| Input Signal: | PT100 | Warranty Time: | 12 Months |
| Model No: | TZ-PTT04C/TZ-PTT04R/TZ-PTT04V | Sensing Element: | NDIR |
| Highlight |
guide rail temperature transmitter,temperature transmitter with warranty,industrial temperature transmitter integration |
||
Product Description
A rail-mounted temperature transmitter is a modular industrial instrument that adopts the standard DIN rail installation method to convert the signals from a resistance temperature detector (RTD) or thermocouple (TC) into standard electrical signals, such as 4-20mA, for output.
- Rail-mounted installation, standardized wiring, facilitating centralized management
- Signal isolation, effectively suppressing ground loop interference, enhancing system stability
- High precision and fast response
- Supports signal distribution (one input, multiple outputs), allowing one sensor to serve multiple systems
- Easy to replace and maintain, without the need to modify on-site pipelines
| Comparison Item | Rail-mounted Temperature Transmitter | Integrated Temperature Transmitter |
|---|---|---|
| Installation Location | Control cabinet DIN rail | Industrial field temperature measurement points (pipes, equipment) |
| Signal Transmission | From on-site sensor wire to cabinet transmitter then to control system | Direct on-site transmission to standard signal for remote transmission |
| Anti-interference | Three-terminal isolation, strong anti-interference | Transmit on-site, reducing interference transmission |
| Wiring | Relatively long sensor cable | Remote transmission as standard signal, better wiring |
| Applicable Scenarios | Signal processing and centralized transmission of multiple measurement points in the cabinet | Single-point temperature measurement on-site and long-distance transmission |
- Industrial process control: Temperature signal acquisition and conversion in industries such as power, metallurgy, chemical engineering, petroleum, and manufacturing.
- Building automation: Temperature monitoring in air conditioning and heating systems.
- Mechanical manufacturing: Temperature monitoring and protection of equipment.
- System integration: As a supporting unit for PLC, DCS systems and unit combination instruments, it completes signal isolation and conversion.
Overall, the rail-mounted temperature transmitter is an expert in "solving integration problems". Its selection logic is very clear: when you need to centrally introduce the signals from multiple on-site temperature sensors into the control room and perform standardization and isolation processing, it is the most suitable solution.
Product Highlights
Guide Rail Temperature Transmitter adopts standard DIN rail mounting to convert RTD or thermocouple signals into 4-20mA output. The modular design simplifies wiring and integration in control cabinets for expert process solutions. Contact us for rail mounting details.
Petroleum Radar Level Gauge 26GHz High Temperature Industrial
Petroleum Radar Level Gauge brings 26GHz radar precision and high-temperature capability to oil storage tank measurement. Every millimeter of level is tracked accurately to prevent inventory loss and safety risk. Inquire now for specifications.
Portable FMCW Radar Level Gauge IP67 Liquid Measurement Sensor
Portable FMCW Radar Level Gauge brings laboratory-grade radar measurement to any tank in the plant or field. With IP67 protection and quick setup, it delivers accurate liquid level readings without permanent installation. Contact us for specifications.
Intelligent Digital Pressure Transmitter Multi-Unit LCD Alarm Relay
Digital pressure transmitter with integrated backlit LCD, local pushbutton configuration, and alarm relay output. Multi-unit display (MPa, kPa, bar, psi, kgf/cm²), IP67 protection, and HART 7 protocol for smart plant integration.
Universal Gauge Pressure Transmitter 4-20mA Oil Water Gas Measurement
Universal Gauge Pressure Transmitter measures pressure relative to the atmosphere for pump discharge, line pressure, tank head and filter differential applications. With 4-20mA output, it suits oil, water and gas measurement. Contact us for range options.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
