High Pressure Electromagnetic Flowmeter IP68 Signal Anti interference

The high-pressure electromagnetic flowmeter is a conductive liquid flow measurement device specifically designed for high-pressure working conditions (typically ≥ 10 MPa, with a maximum of up to 420 MPa).

• Signal Anti-interference: Under high pressure, the density and conductivity of the fluid will change (for example, the conductivity of high-pressure crude oil will decrease by 15% - 20%). Through "Dual-frequency Excitation Technology" (low-frequency stable signal + high-frequency anti-interference) and "High-pressure Fluid Physical Property Compensation Algorithm", signal drift is suppressed to ensure stable accuracy.
• Structural Stress Dispersion: The measurement tube structure is optimized using Finite Element Analysis (FEA) to avoid pipeline deformation caused by high pressure (deformation controlled within 0.02mm), preventing magnetic field deviation from affecting measurement.
• Redundant Sealing Design: To address the risk of high-pressure leakage, a "Multiple Sealing + Pressure Compensation Structure" is adopted to completely prevent fluid leakage.

The main challenges brought by high pressure are mechanical structure strength and sealing. The high-pressure electromagnetic flowmeter has been specially designed in the following aspects:

• Oil exploration: Measuring mud, cement slurry, high-pressure water injection, etc., with pressure up to over 40 MPa.
• Geological drilling: Monitoring conductive liquids or liquid-solid two-phase media under high pressure conditions.
• Chemical and metallurgical industries: Suitable for flow measurement of high-pressure corrosive liquids, mineral pulp and other media.
• Power and environmental protection: Used in high-pressure cooling water, sewage treatment and other scenarios.

High-pressure electromagnetic flowmeters are the "heavyweight warriors" in the electromagnetic flowmeter family. Their core value lies in the ultimate structural safety and sealing reliability. When making a selection, one should not only focus on flow and accuracy but must prioritize pressure rating, flange standard, housing structure, and liner fixation technology as the primary considerations, and ensure that the supplier has the corresponding design, manufacturing, and testing certification capabilities. Standardized installation and operation are the last line of defense to guarantee their long-term stable operation in high-risk environments.